On-line flow measurement and control of pulverised fuel

Hdl Handle:
http://hdl.handle.net/10149/58354
Title:
On-line flow measurement and control of pulverised fuel
Authors:
Zhang, J. (Jianyong); Coulthard, J. M. (John); Cheng, R. (Ruixue); Keech, R. (Rai)
Affiliation:
University of Teesside. School of Science and Technology; ABB Ltd. Gloucestershire.
Citation:
Zhang, J. et al. (2004) 'On-line flow measurement and control of pulverised fuel', Measurement and Control, 37 (9), pp.273-275.
Publisher:
Institute of Measurement & Control
Journal:
Measurement and Control
Issue Date:
Nov-2004
URI:
http://hdl.handle.net/10149/58354
Abstract:
The applications of on-line flow measurement and control of pulverised coal for reducing emissions and improving efficiency of coal fired power stations are discussed. The measurements of the pulverised fuel (PF) mass flow rate, concentration and velocity are required to control and optimize the split balance and air/fuel ratio, and to monitor the conveying conditions. The passive, non-restrictive electrostatic PF meters, which are hazard and maintenance free, are used for these measurements. The values of PF velocity, concentration and fuel mass flow rate, and in conveyors are calculated and displayed in forms of virtual instrumentation. A platinum thermometer is used in each meter to measure the flow temperature.
Type:
Article
Keywords:
on-line flow measurement; control; pulverised fuel; Control systems; flow measuring instruments
ISSN:
0020-2940
Rights:
No publisher policy information on http://www.sherpa.ac.uk/romeo/ [Accessed 08/01/2010]
Citation Count:
0 [Web of Science and Scopus, 08/01/2010]

Full metadata record

DC FieldValue Language
dc.contributor.authorZhang, J. (Jianyong)-
dc.contributor.authorCoulthard, J. M. (John)-
dc.contributor.authorCheng, R. (Ruixue)-
dc.contributor.authorKeech, R. (Rai)-
dc.date.accessioned2009-04-01T10:49:52Z-
dc.date.available2009-04-01T10:49:52Z-
dc.date.issued2004-11-
dc.identifier.citationMeasurement and Control; 37 (9): 273-275-
dc.identifier.issn0020-2940-
dc.identifier.urihttp://hdl.handle.net/10149/58354-
dc.description.abstractThe applications of on-line flow measurement and control of pulverised coal for reducing emissions and improving efficiency of coal fired power stations are discussed. The measurements of the pulverised fuel (PF) mass flow rate, concentration and velocity are required to control and optimize the split balance and air/fuel ratio, and to monitor the conveying conditions. The passive, non-restrictive electrostatic PF meters, which are hazard and maintenance free, are used for these measurements. The values of PF velocity, concentration and fuel mass flow rate, and in conveyors are calculated and displayed in forms of virtual instrumentation. A platinum thermometer is used in each meter to measure the flow temperature.-
dc.publisherInstitute of Measurement & Control-
dc.rightsNo publisher policy information on http://www.sherpa.ac.uk/romeo/ [Accessed 08/01/2010]-
dc.subjecton-line flow measurement-
dc.subjectcontrol-
dc.subjectpulverised fuel-
dc.subjectControl systems-
dc.subjectflow measuring instruments-
dc.titleOn-line flow measurement and control of pulverised fuel-
dc.typeArticle-
dc.contributor.departmentUniversity of Teesside. School of Science and Technology; ABB Ltd. Gloucestershire.-
dc.identifier.journalMeasurement and Control-
ref.assessmentRAE 2008-
ref.citationcount0 [Web of Science and Scopus, 08/01/2010]-
or.citation.harvardZhang, J. et al. (2004) 'On-line flow measurement and control of pulverised fuel', Measurement and Control, 37 (9), pp.273-275.-
All Items in TeesRep are protected by copyright, with all rights reserved, unless otherwise indicated.