| Issue Date | Title | Type | Author(s) |
Jan-2013 | Deposition of alumina coatings on stainless steel by a combined laser/sol–gel technique
Materials Letters | Article | Adraider, Y. (Yousef); Pang, Y. X. (Yongxin); Nabhani, F. (Farhad); Hodgson, S. N. B. (Simon); Sharp, M. C.; Al-Waidh, A. |
Dec-2012 | Structure characterisation and mechanical properties of crystalline alumina coatings on stainless steel fabricated via sol–gel technology and fibre laser processing
Journal of the European Ceramic Society | Article | Adraider, Y. (Yousef); Hodgson, S. N. B. (Simon); Sharp, M.C.; Zhang, Z. Y. (Zhongyi); Nabhani, F. (Farhad); Al-Waidh, A.; Pang, Y. X. (Yongxin) |
Sep-2012 | Experimental study of kerosene-water two-phase flow in a vertical pipe using hot-film and dual optical probes
The Canadian Journal of Chemical Engineering | Article | Hamad, F. A. (Faik); Khan, M. K.; Bruun, H. H. |
Aug-2012 | Development of a methodology for analysing and quantifying the impact of delay factors affecting construction projects
Journal of Construction Engineering and Project Management | Article | Shebob, A. (Abdulhamid); Dawood, N. N. (Nashwan); Shah, R. K. (Raj) |
Feb-2012 | Critical infrastructure protection security layer for DNP3 devices
International Journal of Manufacturing Research | Article | Nabhani, F. (Farhad); Mander, T. (Todd); Hodgson, S. N. B. (Simon); Shelton, P. W. (Paul) |
2012 | Development and distribution of a questionnaire to evaluate technology within the UK Foundry Industry
21st international conference of Flexible Automation and Intelligent Manufacturing (FAIM 2012), Helsinki-Stockholm-Helsinki, 10-13 June, 2012 . | Meetings and Proceedings | Nabhani, F. (Farhad); McKie, M. G. (Martin); Hodgson, S. N. B. (Simon) |
2012 | Comparative study of delay factors in Libyan and the UK construction industry
Engineering, Construction and Architectural Management | Article | Shebob, A. (Abdulhamid); Dawood, N. N. (Nashwan); Shah, R. K. (Raj); Xu, Q. (Qiang) |
2012 | Simulation of kerosene-water two-phase flow in vertical and inclined pipes
1st international conference on petroleum and mineral resources, 2012, Koya, Kurdistan, Iraq, 4 - 6 December 2012. | Meetings and Proceedings | Albarzenji, D.; Kartash, H.; Hamad, F. A. (Faik) |
2012 | Comparative study of delay factors in Libyan and the UK construction industry
Engineering, Construction and Architectural Management | Article | Shebob, A. (Abdulhamid); Dawood, N. N. (Nashwan); Shah, R. K. (Raj); Xu, Q. (Qiang) |
2012 | Current state of developing creep damage constitutive equation for 0.5Cr0.5Mo0.25V ferritic steel
Advanced Materials Research | Article | Xu, Q. H. (Qi); Xu, Q. (Qiang); Pan, Y. X. (Yong); Short, M. (Michael) |
2012 | Literature review on the development of computational software system for creep damage analysis for weldment
Advanced Materials Research | Article | Tan, F. (Feng); Xu, Q. (Qiang); Lu, Z. Y. (Zhong); Xu, D. (Donglai) |
2012 | The review of computational FE software for creep damage mechanics
Advanced Materials Research | Article | Liu, D. (Dezheng); Xu, Q. (Qiang); Lu, Z. Y. (Zhong); Xu, D. (Donglai) |
2012 | Review on the current state of developing of advanced creep damage constitutive equations for high chromium alloy
Advanced Materials Research | Article | An, L. L. (Li); Xu, Q. (Qiang); Xu, D. (Donglai); Lu, Z. Y. (Zhong) |
Oct-2011 | RFID opportunities within manufacturing SMEs
International Journal of Manufacturing Research | Article | Nabhani, F. (Farhad); Zarei, S. (Sara); Hodgson, S. N. B. (Simon); Askari, V. (Vahid); Shelton, P. W. (Paul) |
25-Sep-2011 | Laser-induced deposition of sol–gel alumina coating on stainless steel under wet condition
Surface and Coatings Technology | Article | Adraider, Y. (Yousef); Pang, Y. X. (Yongxin); Nabhani, F. (Farhad); Hodgson, S. N. B. (Simon); Zhang, Z. Y. (Zhongyi) |
Jan-2011 | Assessment of iec 60034-2-1 in determining induction machine efficiency
European Transactions on Electrical Power | Article | Cao, W. (Wenping); Huang, X. (Xiaoyan); French, I. (Ian); Xu, D. (Donglai) |
2011 | Measuring and controlling interface levels in crude oil separator
21st international conference of Flexible Automation and Intelligent Manufacturing (FAIM 2011), Feng Chia University, Taichung, Taiwan, June 26–29, 2011 | Meetings and Proceedings | Sawessi, M. (Mohamed); Nabhani, F. (Farhad); French, I. (Ian) |
2011 | The development and validation of multi-axial creep damage constitutive equations for P91
ICAC'11: The 17th international conference on automation and computing, Huddersfield, September 10, 2011 | Meetings and Proceedings | Xu, Q. (Qiang); Wright, M. (Mark); Xu, Q. (Qihua) |
2011 | A comparative study of delays factors in project completion in Libya and UK construction industry
The fourth international conference on construction engineering and project management (ICCEPM-2011), Sydney, Australia, February 16-18, 2011 | Meetings and Proceedings | Shebob, A. (Abdulhamid); Dawood, N. N. (Nashwan); Xu, Q. (Qiang) |
2011 | Monitoring and measuring different liquid levels in crude oil production facilities
21st international conference of Flexible Automation and Intelligent Manufacturing (FAIM 2011), Feng Chia University, Taichung, Taiwan, June, 26–29, 2011 | Meetings and Proceedings | Sawessi, M. (Mohamed); Nabhani, F. (Farhad); French, I. (Ian) |
