Hdl Handle:
http://hdl.handle.net/10149/92377
Title:
Comparison of IEEE 112 and new IEC standard 60034-2-1
Authors:
Cao, W. (Wenping)
Affiliation:
University of Teesside. School of Science and Technology.
Citation:
Cao, W. (2009) 'Comparison of IEEE 112 and new IEC standard 60034-2-1', IEEE Transactions on Energy Conversion, 24 (3), pp.802-808.
Publisher:
IEEE
Journal:
IEEE Transactions on Energy Conversion
Issue Date:
Aug-2009
URI:
http://hdl.handle.net/10149/92377
DOI:
10.1109/TEC.2009.2025321
Abstract:
This paper describes a comparative study of induction motor testing standards IEEE 112 and newly published IEC 60034-2-1, primarily used in the United States and Europe, respectively. IEC 60034-2-1 has been refined from its earlier version IEC 60034-2 with reference to the IEEE 112. Six induction motors are tested following the two standards and the results are compared with regard to their instrumental accuracy and testing procedures. Power loss results are validated by the calorimetric method. A quantitative method is devised to evaluate the measurement uncertainty that can be interpreted into an efficiency deviation by quadrature addition. This paper is aimed to provide a guideline on interpreting the measured machine efficiency values using these standards and to validate the new IEC standard.
Type:
Article
Language:
en
Keywords:
IEC standards; IEEE standards; induction motors; machine testing
ISSN:
0885-8969; 1558-0059
Rights:
Author can archive publisher's version/PDF. For full details see http://www.sherpa.ac.uk/romeo/ [Accessed 17/02/2010]
Citation Count:
0 [Scopus, 17/02/2010]

Full metadata record

DC FieldValue Language
dc.contributor.authorCao, W. (Wenping)en
dc.date.accessioned2010-02-17T13:47:54Z-
dc.date.available2010-02-17T13:47:54Z-
dc.date.issued2009-08-
dc.identifier.citationIEEE Transactions on Energy Conversion; 24 (3): 802-808en
dc.identifier.issn0885-8969-
dc.identifier.issn1558-0059-
dc.identifier.doi10.1109/TEC.2009.2025321-
dc.identifier.urihttp://hdl.handle.net/10149/92377-
dc.description.abstractThis paper describes a comparative study of induction motor testing standards IEEE 112 and newly published IEC 60034-2-1, primarily used in the United States and Europe, respectively. IEC 60034-2-1 has been refined from its earlier version IEC 60034-2 with reference to the IEEE 112. Six induction motors are tested following the two standards and the results are compared with regard to their instrumental accuracy and testing procedures. Power loss results are validated by the calorimetric method. A quantitative method is devised to evaluate the measurement uncertainty that can be interpreted into an efficiency deviation by quadrature addition. This paper is aimed to provide a guideline on interpreting the measured machine efficiency values using these standards and to validate the new IEC standard.en
dc.language.isoenen
dc.publisherIEEEen
dc.rightsAuthor can archive publisher's version/PDF. For full details see http://www.sherpa.ac.uk/romeo/ [Accessed 17/02/2010]en
dc.subjectIEC standardsen
dc.subjectIEEE standardsen
dc.subjectinduction motorsen
dc.subjectmachine testingen
dc.titleComparison of IEEE 112 and new IEC standard 60034-2-1en
dc.typeArticleen
dc.contributor.departmentUniversity of Teesside. School of Science and Technology.en
dc.identifier.journalIEEE Transactions on Energy Conversionen
ref.citationcount0 [Scopus, 17/02/2010]en
or.citation.harvardCao, W. (2009) 'Comparison of IEEE 112 and new IEC standard 60034-2-1', IEEE Transactions on Energy Conversion, 24 (3), pp.802-808.-
All Items in TeesRep are protected by copyright, with all rights reserved, unless otherwise indicated.