Automatic planning for machine tool calibration: a case study

Hdl Handle:
http://hdl.handle.net/10149/263312
Title:
Automatic planning for machine tool calibration: a case study
Authors:
Parkinson, S. (Simon); Longstaff, A. P. (Andrew); Fletcher, S. (Simon); Crampton, A. (Andrew); Gregory, P. J. (Peter)
Affiliation:
University of Huddersfield
Citation:
Parkinson, S., Longstaff, A., Fletcher, S., Crampton, A. and Gregory, P. (2012) 'Automatic planning for machine tool calibration: a case study', Expert Systems with Applications, 39 (13), pp.11367-11377.
Publisher:
Elsevier
Journal:
Expert Systems with Applications
Issue Date:
Oct-2012
URI:
http://hdl.handle.net/10149/263312
DOI:
10.1016/j.eswa.2012.03.054
Additional Links:
http://linkinghub.elsevier.com/retrieve/pii/S0957417412005775
Type:
Article
Language:
en
Keywords:
HTN; machine tool calibration; PDDL; planning; Pseudo-static geometric errors
ISSN:
0957-4174
Rights:
Author can archive post-print (ie final draft post-refereeing).For full details see http://www.sherpa.ac.uk/romeo/ [Accessed 20/12/2012].
Citation Count:
0 [Scopus, 20/12/12]

Full metadata record

DC FieldValue Language
dc.contributor.authorParkinson, S. (Simon)en_GB
dc.contributor.authorLongstaff, A. P. (Andrew)en_GB
dc.contributor.authorFletcher, S. (Simon)en_GB
dc.contributor.authorCrampton, A. (Andrew)en_GB
dc.contributor.authorGregory, P. J. (Peter)en_GB
dc.date.accessioned2012-12-20T09:34:20Z-
dc.date.available2012-12-20T09:34:20Z-
dc.date.issued2012-10-
dc.identifier.citationExpert Systems with Applications; 39 (13):11367-11377en_GB
dc.identifier.issn0957-4174-
dc.identifier.doi10.1016/j.eswa.2012.03.054-
dc.identifier.urihttp://hdl.handle.net/10149/263312-
dc.language.isoenen
dc.publisherElsevieren_GB
dc.relation.urlhttp://linkinghub.elsevier.com/retrieve/pii/S0957417412005775en_GB
dc.rightsAuthor can archive post-print (ie final draft post-refereeing).For full details see http://www.sherpa.ac.uk/romeo/ [Accessed 20/12/2012].en_GB
dc.subjectHTNen_GB
dc.subjectmachine tool calibrationen_GB
dc.subjectPDDLen_GB
dc.subjectplanningen_GB
dc.subjectPseudo-static geometric errorsen_GB
dc.titleAutomatic planning for machine tool calibration: a case studyen
dc.typeArticleen
dc.contributor.departmentUniversity of Huddersfielden_GB
dc.identifier.journalExpert Systems with Applicationsen_GB
ref.citationcount0 [Scopus, 20/12/12]en_GB
or.citation.harvardParkinson, S., Longstaff, A., Fletcher, S., Crampton, A. and Gregory, P. (2012) 'Automatic planning for machine tool calibration: a case study', Expert Systems with Applications, 39 (13), pp.11367-11377.en_GB
All Items in TeesRep are protected by copyright, with all rights reserved, unless otherwise indicated.