Numerical and Experimental Study of Flow Structure and Cooling Behavior of Air Impingement on a Target Plate

Hdl Handle:
http://hdl.handle.net/10149/326004
Title:
Numerical and Experimental Study of Flow Structure and Cooling Behavior of Air Impingement on a Target Plate
Authors:
Adnan A. A. R. (Abdul Rasool); Jirunthanin, V.; Hamad, F. A. (Faik)
Affiliation:
Teesside University. Digital Futures Institute
Citation:
Adnan A. A. R., Jirunthanin, V., Hamad, F. A. (2014) 'Numerical and Experimental Study of Flow Structure and Cooling Behavior of Air Impingement on a Target Plate' International Journal of Thermal & Environmental Engineering; 8 (1): 33-45
Publisher:
International Association for Sharing Knowledge and Sustainability
Journal:
International Journal of Thermal & Environmental Engineering
Issue Date:
2014
URI:
http://hdl.handle.net/10149/326004
DOI:
10.5383/ijtee.08.01.005
Additional Links:
http://iasks.org/sites/default/files/5-1-vol8.pdf
Abstract:
Numerical and experimental study is carried out to investigate flow structure and heat transfer of air jet normally impinging on a flat plate. Three orifices of 5, 10 and 20 mm diameters and Z/d ratios in the range of 2 to 8 were used. The numerical simulations were performed with the ANSYS FLUENT for steady, three-dimensional, incompressible, and turbulent flow from the jet. The comparison of CFD predictions with experimental results show that a good agreement of the average Nusselt number, the pressure coefficients distributions, radial velocity distributions of the fee jet.
Type:
Article
Language:
en
Keywords:
CFD simulation; Nusselt number; jet flow; wall jet velocity
Rights:
Open Access archiving not supported. For full details see: http://iasks.org/journals/ijtee [Accessed: 09/09/2014]

Full metadata record

DC FieldValue Language
dc.contributor.authorAdnan A. A. R. (Abdul Rasool)en
dc.contributor.authorJirunthanin, V.en
dc.contributor.authorHamad, F. A. (Faik)en
dc.date.accessioned2014-09-09T11:23:56Z-
dc.date.available2014-09-09T11:23:56Z-
dc.date.issued2014-
dc.identifier.citationInternational Journal of Thermal & Environmental Engineering; 8 (1): 33-45en
dc.identifier.doi10.5383/ijtee.08.01.005-
dc.identifier.urihttp://hdl.handle.net/10149/326004-
dc.description.abstractNumerical and experimental study is carried out to investigate flow structure and heat transfer of air jet normally impinging on a flat plate. Three orifices of 5, 10 and 20 mm diameters and Z/d ratios in the range of 2 to 8 were used. The numerical simulations were performed with the ANSYS FLUENT for steady, three-dimensional, incompressible, and turbulent flow from the jet. The comparison of CFD predictions with experimental results show that a good agreement of the average Nusselt number, the pressure coefficients distributions, radial velocity distributions of the fee jet.en
dc.language.isoenen
dc.publisherInternational Association for Sharing Knowledge and Sustainabilityen
dc.relation.urlhttp://iasks.org/sites/default/files/5-1-vol8.pdfen
dc.rightsOpen Access archiving not supported. For full details see: http://iasks.org/journals/ijtee [Accessed: 09/09/2014]en
dc.subjectCFD simulationen
dc.subjectNusselt numberen
dc.subjectjet flowen
dc.subjectwall jet velocityen
dc.titleNumerical and Experimental Study of Flow Structure and Cooling Behavior of Air Impingement on a Target Plateen
dc.typeArticleen
dc.contributor.departmentTeesside University. Digital Futures Instituteen
dc.identifier.journalInternational Journal of Thermal & Environmental Engineeringen
or.citation.harvardAdnan A. A. R., Jirunthanin, V., Hamad, F. A. (2014) 'Numerical and Experimental Study of Flow Structure and Cooling Behavior of Air Impingement on a Target Plate' International Journal of Thermal & Environmental Engineering; 8 (1): 33-45-
All Items in TeesRep are protected by copyright, with all rights reserved, unless otherwise indicated.