Hdl Handle:
http://hdl.handle.net/10149/99106
Title:
Physical properties of flash pyrolysis liquids
Authors:
Peacocke, G. V. C.; Russell, P. A. (Paul); Jenkins, J. D. (John); Bridgwater, A. V. (Anthony)
Affiliation:
Aston University. Department of Chemical Engineering and Applied Chemistry. Energy Research Group.
Citation:
Peacocke, G. V. C. et. al. (1994) 'Physical properties of flash pyrolysis liquids', Biomass and Bioenergy, 7 (1-6), pp.169-177.
Publisher:
Elsevier
Journal:
Biomass and Bioenergy
Issue Date:
1994
URI:
http://hdl.handle.net/10149/99106
DOI:
10.1016/0961-9534(94)00056-Y
Abstract:
Process design requires knowledge of the physical and chemical properties of the fluids being handled. The measurement of a range of properties of two pyrolysis liquids is described. The pyrolysis liquid properties reported are: density, viscosity, refractive index, thermal capacity, thermal conductivity, and their variation with temperature, time, exposure to air/oxygen and history. The oils follow conventional behaviour for most properties except that there is marked differences in viscosity behaviour above around 50°C compared to below 50°C. There is a noticeable effect from exposure to oxygen/air which increases viscosity. This may be due to removal of volatiles, removal of water or reaction. There is clear evidence that some reaction occurs even under ambient conditions.
Type:
Article
Language:
en
Keywords:
density; specific gravity; fuel oils; liquids; physical properties; refractive index; specific heat; thermal conductivity; viscosity
ISSN:
0961-9534
Rights:
Author can archive post-print (ie final draft post-refereeing). For full details see http://www.sherpa.ac.uk/romeo/ [Accessed 18/05/2010]
Citation Count:
15 [Scopus, 18/05/2010]

Full metadata record

DC FieldValue Language
dc.contributor.authorPeacocke, G. V. C.en
dc.contributor.authorRussell, P. A. (Paul)en
dc.contributor.authorJenkins, J. D. (John)en
dc.contributor.authorBridgwater, A. V. (Anthony)en
dc.date.accessioned2010-05-18T13:00:33Z-
dc.date.available2010-05-18T13:00:33Z-
dc.date.issued1994-
dc.identifier.citationBiomass and Bioenergy; 7(1-6):169-177en
dc.identifier.issn0961-9534-
dc.identifier.doi10.1016/0961-9534(94)00056-Y-
dc.identifier.urihttp://hdl.handle.net/10149/99106-
dc.description.abstractProcess design requires knowledge of the physical and chemical properties of the fluids being handled. The measurement of a range of properties of two pyrolysis liquids is described. The pyrolysis liquid properties reported are: density, viscosity, refractive index, thermal capacity, thermal conductivity, and their variation with temperature, time, exposure to air/oxygen and history. The oils follow conventional behaviour for most properties except that there is marked differences in viscosity behaviour above around 50°C compared to below 50°C. There is a noticeable effect from exposure to oxygen/air which increases viscosity. This may be due to removal of volatiles, removal of water or reaction. There is clear evidence that some reaction occurs even under ambient conditions.en
dc.language.isoenen
dc.publisherElsevieren
dc.rightsAuthor can archive post-print (ie final draft post-refereeing). For full details see http://www.sherpa.ac.uk/romeo/ [Accessed 18/05/2010]en
dc.subjectdensityen
dc.subjectspecific gravityen
dc.subjectfuel oilsen
dc.subjectliquidsen
dc.subjectphysical propertiesen
dc.subjectrefractive indexen
dc.subjectspecific heaten
dc.subjectthermal conductivityen
dc.subjectviscosityen
dc.titlePhysical properties of flash pyrolysis liquidsen
dc.typeArticleen
dc.contributor.departmentAston University. Department of Chemical Engineering and Applied Chemistry. Energy Research Group.en
dc.identifier.journalBiomass and Bioenergyen
ref.citationcount15 [Scopus, 18/05/2010]en
or.citation.harvardPeacocke, G. V. C. et. al. (1994) 'Physical properties of flash pyrolysis liquids', Biomass and Bioenergy, 7 (1-6), pp.169-177.-
All Items in TeesRep are protected by copyright, with all rights reserved, unless otherwise indicated.